| Author | Comments |
|---|---|
|
Posted: Feb 23, 2009 05:32 PM
|
Foam adheasion to techshield or Thermostat sheathing
Any issues with 1/2# or 2# adheasion to radiant barrier sheathing?Bud |
|
mason
Posted: Feb 24, 2009 07:24 AM
|
There could be. If the film is shiny, the foam may not adhere well to it. I would test it out to check its adhesion first. Also, when you spray foam to a film, it has a tendency to cause the film to draw away from the substrate forming a bubble under it. You need to fasten the film down well to prevent this from happening. |
|
Posted: Feb 27, 2009 07:01 AM
|
...i remember hearing at the spfa that relflexive foils/radiant barriers require 6-8" of air space BENEATH them to be effective,,, now i could have been confused,,and i usally am,, mason,,,is this correct?? |
|
mason
Posted: Feb 27, 2009 01:07 PM
|
Good question. I don't have any data on the use of sprayfoam and radiant barriers and their effective use together. Any info out there that you could share? |
Copyright 2025. All Rights Reserved.
