Q&A Forums
unequal balance Post New Topic | Post Reply
| Author | Comments |
|---|---|
|
Ryan Rhoads
Posted: Aug 06, 2006 02:02 AM
|
unequal balance
I have tried for the last to days to maintain an equal pressure balance with 2 lb. foam. There is something going on. I cleaned the gun totally and played with temps. has anyone else had this problem
|
|
Gerry Wagoner
Posted: Aug 06, 2006 04:05 PM
|
Which side is high? A fluid section may have some wear issues that allow bypass. That will affect the pressure balance. You might also have a small blockage on the whip orfice where it necks down from the regular 3/8" hose. This is more likely on the iso side. all the best, gcw |
|
Posted: Aug 06, 2006 09:38 PM
|
inline strainers,,check em...'specially the A side,,,spraying regularly,,,check monthly in the humid time in your area... what is your ambient temps?? what is it at startup? does pressure come up as you spray?temps overnite? Open cell or closed cell? |
|
Andy Hull
Posted: Aug 08, 2006 03:47 PM
|
What kind of machine do you have? What is happening...is one side increasing more or is one side decreasing while not pumping. Andy |
|
Posted: Aug 10, 2006 04:48 PM
|
Make sure your B-side isnt frothing. Tends to be an issue in this heat. |
