Q&A Forums
Rebuild A side pump on E-20 Post New Topic | Post Reply
| Author | Comments |
|---|---|
|
Kevin Gubbels
Posted: Jan 18, 2010 09:25 PM
|
Rebuild A side pump on E-20
Order the rebuild kit, it will be here in the morning. Any advise or suggestions on rebuilding this pump?
|
|
Linerman
Posted: Jan 23, 2010 12:37 PM
|
lefty loosey righty tighty |
|
Posted: Jan 24, 2010 05:54 AM
|
Your probably done by now! It's easy, sometimes the iso makes taking it apart difficult. Be patient and you will be back to spraying full pressure in no time! |
|
Posted: Jan 26, 2010 06:19 AM
|
kevin..how did it go?? |
|
Kevin Gubbels
Posted: Jan 26, 2010 08:23 PM
|
It's went ok. took about 2 hours. The directions Graco provides are not very good. I just ordered the rebuild kit because i ruined one of the o-rings when i took the pump apart in the field. I figured 2 years old and 80 sets i should just as well rebuild it. Even if it didn't need rebuilt, it is good to have the knowledge of how the pump works. On the negative side, after i got the pump rebuilt, took it out to the field, and it still wasn't building pressure. I took it back apart, paid extra attention to the balls in it, and put it back together. It then worked, and I've sprayed 2 sets without a problem. thanks for asking! |
