Q&A Forums

pressure problems with glascraft A5-6000 Post New Topic | Post Reply

Author Comments
clifton hebert
Posted: Jun 09, 2008 09:57 AM
pressure problems with glascraft A5-6000
can not build up more than 600 psi.
running 120 psi at machine. free flow of flow works fine.
start sprayingand machine only make couple strokes
and is very sluggish.
anyone have this happen??????????
Posted: Jun 09, 2008 10:01 PM
What size airline do you have running to the unit? Give me a call.

Gerry Wagoner
Posted: Jun 30, 2008 03:06 PM
air motor icing?
philip mullins
Posted: Jul 01, 2008 12:11 AM
how long have you been pushing too much air into ur machine? 100 psi max for that machine at the regulator. do you have a good air drier and is it functioning properly? water in the air motor could slow it down to say the least. even a little moisture over time will destroy the self lubricating o rings. i assume you checked all your screens???? did it start acting up all at once or was it a developing problem/ also how "used" is ur machine? and does ur compressor seem to be kicking on less now or does it seem to be using the same cfm as before the problem?

You need to login to reply to this topic. Please click here to login.