P-2 - teflon coating | Equipment Q&A | Spray Foam Technical Questions and Answers | SprayFoam Magazine Q&A Forums

Q&A Forums

Author	Comments
Posted: Mar 05, 2007 07:49 PM	P-2 - teflon coating I use a crock pot with CU-6 to clean the GX-7 parts. The screw-on cap at the PCD seems to be teflon coated and over time has been scratched so now it is rough, which is no problem for this part because it is on the outside. What parts of the P-2 are coated? What is the most effective way to clean them without damage to this coating? Erik
SprayFoamSupply.com Posted: Mar 11, 2007 08:21 AM	Erik, I have soaked all of the parts of the P2 in cleaner without damaging anything. The only possible concern with a long term soak would be the handles on the shut off valves. George

Author

Comments

Posted: Mar 05, 2007 07:49 PM

P-2 - teflon coating

I use a crock pot with CU-6 to clean the GX-7 parts. The screw-on cap at the PCD seems to be teflon coated and over time has been scratched so now it is rough, which is no problem for this part because it is on the outside.
What parts of the P-2 are coated? What is the most effective way to clean them without damage to this coating?
Erik

SprayFoamSupply.com

Posted: Mar 11, 2007 08:21 AM

Erik,

I have soaked all of the parts of the P2 in cleaner without damaging anything. The only possible concern with a long term soak would be the handles on the shut off valves.

George

You need to login to reply to this topic. Please click here to login.