Q&A Forums

Foam over termites Post New Topic | Post Reply

Author Comments
David Pressler
Posted: Apr 10, 2012 10:21 AM
Foam over termites
Had my attic sprayed with 2 lb open cell foam after spraying months later notified that termites are present and building needs to be tented? NOW What?
Tim Wojnarski
Posted: Apr 11, 2012 07:29 AM
Not familiar with 2lb open cell, that aside, where are the termites?
mark moyer
Posted: Apr 11, 2012 08:10 AM
respectfully,,
call an exterminator...

if you are looking for fault..
not here,,
not the foam..more than likely the critters were present before the foam was applied..(possible later infestion but not likely if you have a considerable infestation)
foam is plastic,,,pure and simple,,termites dont like or live in plastic,,they like wood..and other organics,,
Anthony Scarpelli
Posted: Oct 15, 2012 08:35 PM
Buck not sure what part of the country you live in. If you are in the humid zones then termite traps are highly recommended in all homes regardless.

Basically you put 10 oz coffee can in the ground a few feet from the wall and inside it you put bate.

If you can get at the buggers (trails) throwing a couple of ozs of borax cleaning powder will destroy all that come in contact with the powder trail.

Next you want to kill the queen.

Boratic acid the concentrated borax is also sold as "roach Proof" is about as harmful to humans as baking soda but it will make the queen unable to have more bugs. The trick to get the drones to take it to her and feed her with it and her to eat it is to mix roach proof powder($3.96 from ace hardware) with tooth past and or scope mouthwash to a thick paste. the glycol sugars will attract the bugs and they take it back to the queen. they will be gone in no time at all.

So to instantly kill those damaging a particular part of the house can can use borax soap but to get the nest you do not use borax powder as you do not want to kill the drones taking the bate to the queen.

This works with ants, fire ants, roaches or any bug with a thorax.

You need to login to reply to this topic. Please click here to login.