NORTON, OH–August 9, 2012–Fomo Products' Handi-Foam® E84 Class 1 low pressure spray polyurethane foam (SPF) insulation has been evaluated for use in residential duct work applications by the ICC Evaluation Service. Additionally, Handi-Foam E84 low pressure SPF was tested in accordance to NFPA 286 in a simulated end-use configuration, meaning the product can be left exposed in residential duct joint sealing applications, eliminating the need for an ignition barrier, saving contractors time and money.
Handi-Foam E84 Class 1 low-pressure spray polyurethane foam was found to be in compliance by the ICC Evaluation Service (report ESR 2717) for the 2009 International Building Code (IBC), 2009 International Residential Code (IRC) and the 2009 International Energy Conservation Code (IECC) requirements. Handi-Foam E84 Class 1 is approved for use as nonstructural thermal insulating material in Type V-B construction under the IBC and dwellings under the IRC.
Based on this successful testing, Handi-Foam E84 Class 1 can be used in residential duct joint sealing applications without a thermal or ignition barrier coating. The use of spray foam in residential duct work is limited to a maximum depth of two inches in thickness and six inches in width for each application.
"This is a great breakthrough and time saver for contractors. Previously spray foam could not be used as a sealant without use of a thermal or ignition barrier," said Sandy Gump, product compliance manager at Fomo Products. "We are excited to offer our product for residential duct work, for a quicker job completion while using less material."
Handi-Foam E84 Class 1 SPF was evaluated on physical properties, surface-burning characteristics, thermal resistance (R-values) and air permeability.
For more information on specific limitations and restrictions, please view the report summary via the link provided below.
All Fomo products are for professional use only and should be used with the proper training and personal protective equipment. More information about Fomo's extensive product line, including additional products and sizes, and health and safety information can be found at via the contact details and links provided below.
About Fomo Products, Inc.: Fomo Products, Inc., USA, was founded in 1975 and is a member of the FLM Group of Companies. The FLM Group is one of the world's largest manufacturers of low pressure one and two component polyurethane foam sealants, adhesives and spray foam in pressurized, disposable and refillable packaging. Fomo Products, Inc. management system carries an ISO 9001 management system registration. Other products manufactured by Fomo Products, Inc., include Handi-Foam® Sealants and Spray Foams, Handi-Seal® Window and Door Sealants and Handi-Stick® Adhesives.