News Archives » Protective Coatings
Protective Coatings
Ignition Barrier Coating Over Spray Foam Insulation Passes Fire Testing
DEMILEC (USA) LLC®’s SEALECTION® 500 passes fire testing when covered with No-Burn® Plus XD.

ARLINGTON, TX – November 22, 2011 - DEMILEC (USA) LLC announced today that its spray foam insulation, SEALECTION® 500 passed fire testing when covered with No-Burn® Plus XD. The test was performed in accordance with AC 377 appendix X standards. No-Burn Plus XD, used as an ignition barrier substitute, was applied at a thickness of 6 mils wet (4 mils dry). At this thickness, No-Burn Plus XD will cover approximately 267 sq. ft. per gallon.

"Offering an affordable, and easy-to-apply, Appendix X approved intumescent coating to our Authorized Contractors is important us,” said Dave Lall, CEO of DEMILEC (USA). “And No-Burn Plus XD offers these benefits to our team of Authorized Contractors.”

No-Burn Plus XD is a low VOC ignition barrier manufactured in the USA; meeting both International Building Code (IBC) and International Residential Code (IRC) specific requirements for spray applied foam plastic insulation, while contributing to LEED regional material points and complying with the ARRA Buy American provision. Plus XD is available directly through Demilec USA. Technical questions about Plus XD should be directed to the manufacturer, No-Burn, Inc. Estimating and technical support are provided by No-Burn, Inc. No-Burn® applicators are invited to take the comprehensive online training. Email info@noburn.com for direct customer support and training access. Refer to the manufacturer’s Technical Data Sheet for PPE, spray rig recommendations and application preparation.

About DEMILEC (USA) LLC® DEMILEC (USA) LLC. is a manufacturer of a line of high quality spray foam insulation products that include products and brands such as SEALECTION® 500, SEALECTION Agriblance® and HEATLOK SOY® 200. Visit the link below to find out more information.

About No-Burn, Inc. No-Burn, Inc. has been leading the way in fire resistant technology since 1998. All No-Burn® products are evaluated by independent third party laboratories for compliance with International Codes. No-Burn’s products are low VOC, non-toxic and non-carcinogenic and contribute to the enhancement of the built environment. Several No-Burn® products also offer a dual level of protection, reducing the risk of fire and resisting the growth of toxic-black mold. Visit the link below to find out more information.

DEMILEC USA LLC® - Spray Polyurethane Foam Systems Manufacturer Directory Page


Email To Friend
Your Email:
Their Email:
Verification Information
Type in what you see above: *  
Verification Information

Please type the characters you see in this picture.   Note: The characters are all lower case.

 

News Archives Home   |   News   |   RSS Feeds
Public Announcements   |   Blogs   |   Columns / Newsletters   |   Letters
Submit A News Story   |   Contact The Editor