Business Directory Print Listing
Spray Foam Roofing and Insulation in California

Stone Foam Roofing and Insulation Company
      Spray Foam Roofing Contractor - Los Angeles, Orange, San Bernardino, Riverside - Spray Foam Company

    Address/Contact Info
USA - Southwest
730 North Coney Avenue
Azusa,   California   91702
United States


Google®  |  MapQuest®  |  Yahoo®

Phone: 626-969-6515
Fax: 626-334-6296
Visit Our Website Contact Us Update This Listing
Visit Website Contact Us Update Listing
 
    Description


 www.stoneroof.com

 

Polyurethane Foam

Spray Polyurethane Foam (SPF) Roofing

Spray Foam Roofing Systems provide many benefits to building owners. The two most prominent benefits are waterproofing/leak prevention and insulation value. Many additional benefits also exist such as superior compressive strength, lightweight, self-flashing, durable and long lasting.
Benefits of Spray Foam Roof Systems:

  • Leak free monolithic seal over your entire roof deck
  • Self flashing
  • High insulation value / Rapid payback with energy savings
  • Strong adhesion and wind uplift resistance
  • Weather resistant
  • Lightweight and high strength
  • UL and FM approved systems

Sprayed Polyurethane Foam Roofing

Sprayed Polyurethane Foam is applied as a liquid using plural-component spray equipment to fill cracks and crevices. It then expands approximately 30 times its original liquid volume to form a hard, closed cell monolithic roof surface. The Polyurethane Foam dries within seconds after applied to the roof surface. Its expansion results in a weather tight roofing membrane that is fully adhered to the substrate. Because of polyurethane's lightweight it adds little additional weight to the structure and is often used in remedial applications. Polyurethane Foam has a history of more than 35 years as a maintainable roofing medium. Polyurethane Foam adds excellent insulation value to the structure and utility bills can reflect the difference.

Once the Spray Foam has been applied to the proper thickness and finish specifications, a protective layer of elastomeric coating or gravel is applied. This protective layer produces a durable weather resistant surface and that can be walked on for normal maintenance.
 

Protective Coatings for Spray Foam Roofs

Once the Spray Foam has been applied to the proper thickness and finish specifications, a protective layer of elastomeric coating is applied. This protective layer produces a durable weather resistant surface and that can be walked on for normal maintenance.
 

Energy Star™ Cool Roofs Program

Energy Star Cool Roofs reduces energy bills.

ENERGY STAR qualified roof coating products reduce the amount of air conditioning needed in buildings, and can reduce energy bills by up to 50%. The Cool Roof Program defines certain standards for reflectivity, and maintenance of reflectivity, in roof coating systems. These light colored roof coatings reflect the suns heat and UV rays and often lower the temperature of the roof by up to 100 degrees.
 

Spray Foam Insulation

There is no better home insulating material that can seal your home from air and moisture intrusion, save on costly utility bills, strengthen your home, and protect your family's health from dangerous mold than Spray Foam insulation.
 

Benefits of Spray Foam Insulation

  • Stops air and moisture infiltration
  • Makes your home more comfortable
  • Saves on energy costs
  • Adds strength to the building structure
  • It is permanent and will not sag
  • Keeps dust and pollen out
  • Reduces capacity requirements, maintenance and wear of HVAC equipment

Spray Foam Insulation Redefines Traditonal Construction Methods and Benefits Modern Building Sciences and Energy Efficient Green Building Initiatives

Read all about how spray foam used in the Building Envelope outperforms fiberglass insulation, becomes a superior air abrrier, and defies traditional, and perhaps, outdated building practices of attic and crawl space ventilation.
 

SPF Saves You Money and Pays for Itself

Save Money - Lower Utility Bills

Spray Foam home insulation saves on energy costs and lowers utility bills. SPF is used to seal the entire "building envelope" of your home to prevent air and moisture infiltration. The US Department of Energy (DOE) studies show that 40% of your home's energy is lost due to air infiltration. This air infiltrates the home in the form of drafts through walls sockets, windows and doorways.

Often times no expensive building wrap or additional vapor protection is required during construction when using SPF, saving money yet again.
 

High R-Value

Sprayed polyurethane foam has an aged R-value of approximately 6.0 per 1 inch thickness (depending on the particular formulation and application, higher values have been achieved), enabling it to provide more thermal resistance with less material than any other type of commercial insulation material. SPF systems are frequently used to insulate and protect a wide variety of residential, commercial, and industrial buildings.

Monthly energy and utility savings of 30% or greater can be achieved when compared to the alternative roofing and insulation systems. The cost of an SPF roof or insulation system can often be recovered in less than 5 years, simply through energy savings alone.
 

Prevents Air, Moisture and Gas Infiltration

Studies have shown that as much as 40% of a building's total energy loss is due to air infiltration. Traditional fiberglass insulation is only stapled, or placed into the wall cavities and does not seal the stud and wall cavities from end to end, or top to bottom. Air infiltration can pass through these gaps, making it far less efficient than SPF. SPF not only adheres to, but forms to the walls and floors to create a tight seal and insulating barrier that stops this air leakage. SPF also boasts the highest R-value per inch than any other commercial material, (upwards of R-7.0, compared with Fiberglass at R-3.5) making your home more comfortable and less expensive to heat in the winter, and cool in the summer.

Since SPF acts as an air barrier, it also helps to reduce moisture infiltration, which is a source of dangerous mold and mildew growth in the home, and can cause severe health problems to its occupants. So save your family and save money at the same time with SPF home insulation systems. Moisture infiltration can also cause structural damage to your home or building.
 

Helps Reduce Moisture and Mold

Reduce Mold Damage

Molds produce tiny spores to reproduce. Mold spores waft through the indoor and outdoor air continually. When mold spores land on a damp spot indoors, they may begin growing and digesting whatever they are growing on in order to survive. There are molds that can grow on wood, paper, carpet, and foods. When excessive moisture or water accumulates indoors, mold growth will often occur, particularly if the moisture problem remains undiscovered or un-addressed. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture. SPF insulation is the key. Watch Video.
 

Enhances Overall Building Stability

Since SPF is seamless and monolithic, foam sprayed into the walls enhances overall building stability and reduces "rack and sheer".
 

Deadens Sound Travel and Noise

Spray Foam also reduces airborne sound making the home acoustically tighter and more private from room to room.

 
Locations
Los Angeles, San Bernardino, Riverside, San Diego, Ventura, Pasadena, Hollywood, West Hollywood, West Los Angeles, Glendale, Burbank, Santa Clarita, Palmdale, Lancaster, Victorville, Palm Desert, Palm Springs, San Gabriel Valley, Covina, City of Industry, City of Commerce, Moreno Valley, Whittier, Fullerton, Pomona, Corona, Downey, Anaheim.

 www.stoneroof.com

Business Keywords and Service Areas:

Spray Foam Roofing Los Angeles - Southern California from Santa Barbara, Los Angeles to San Diego. Commercial Spray Foam Roofing and Insulation – Spray Foam Roofing System. Spray Foam Roofing Los Angeles, Beverly Hills, Pasadena, Glendale, Burbank, Santa Clarita, Bel Air, Santa Monica, Hollywood, West Hollywood, West Los Angeles, Covina, Whittier, City of Commerce, City of Industry,Lancaster,Palmdale,Victorville,San Gabriel,Orange County,Riverside County,San Bernardino County,Ventura County

Related SprayFoam.com Business Directory Category(s)
 
  Foam Contractors - USA : California : Foam Roofing
  Foam Contractors - USA : California : Insulation - Commercial
 
 

Print Listing
Send This Listing To Someone
 
Email To Friend
Your Email:
Their Email:
Verification Information
Type in what you see above: *  
Verification Information

Please type the characters you see in this picture.   Note: The characters are all lower case.

 
 

Business Directory Search
 
Search for: Contractor Supplier
  
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
 
 

Business Directory Home  |  Suggest A Listing
Regional Business Directory
Contact The Business Directory Administrator