Tip-Top Roofing Inc. - Moreno Valley Roofing Contractor
Serving Riverside, Redlands, Corona, San Bernardino, Ontario, Rancho Cucamonga, Mira Loma, Fontana, Rialto, Colton, Yucaipa, Beaumont, Calimesa, Banning and the Entire Inland Empire
Riverside, Redlands, Los Angeles, San Diego, Orange County, and Surrounding areas.
Southern California Foam Roofing Contractor
Serving the Entire State of California and Nevada
Tip Top Roofing has earned its reputation as being one of the best roofing contractors throughout Southern California. We specialize in Sprayed Polyurethane Foam Roofing. Call us today at 951-485-4080 to receive a FREE ESTIMATE or simply take a moment to fill out our online request form.
Integrity, Professionalism and Service Since 1997
Bonded & Insured
Save it, Don’t Replace it!
~ Our Motto: The Success of our business depends on Your Satisfaction.~
H.O.A’S - APARTMENTS - CONDOS
PROPERTY MANAGEMENT ACCOUNTS
Restoration, Coatings, Re-roofs and Repairs
Shingle, Tile, Foam, Flat Roofs & Carports
Exterior Wood Repairs
Roof Coatings, Built-ups, Single ply
Maintenance programs - Roof Inspections
Residential - Industrial - Commercial
All of our roofers are trained in roofing methods, materials, and current Occupational Health and Safety Standards, with many years of actual hands on experience and training. Our service includes inspection, consultation and recommendation of appropriate methods, materials and estimates to resolve our customers individual requirements. We have competitive prices and written guarantee's, customer friendly service and staff. We are fully insured and licensed, and are covered to construct a safe working environment. Call us today 951-485-4080 and get your FREE estimate or fill out our online request form and remember a roof is only as good as it's installation. Tip Top Roofing Inc., you can trust us for all your roofing needs.
Tip Top Roofing Inc. has attained high standards for roofing restoration with 26 years of experience. We are a fully licensed contractor ( 826997) for your security. Tip Top Roofing Inc. uses top-quality products and we strive to be the experts in the business. Our experienced talent and efforts are always continual in our services. We provide information on roofing products and solutions to better our customers requirements.
What Type of Roof Does Your Building Have?
Sprayed-in-Place Polyurethane Foam is sprayed in-place on the roof, this fills in any cracks. The foam then expands and dries within seconds after it is applied. It forms an air tight seal to keep the rain and snow from leaking through the roof. After the Sprayed Polyurethane Foam is applied a dry gravel or elastomeric coating is applied as a protective layer.
Spraying foam takes a good amount of experience and training. You can rest assured that all of our employees are very well trained to do this. It also requires good weather, Sprayed Polyurethane Foam cannot be applied to a wet or damp surface. With proper preparation of your current roof and a professional application, Sprayed Polyurethane Foam can last up to 35 years.
SPF can be used to add slope and fill in depressed areas on the roof surface eliminating complicated tapered rigid board insulation in multiple layers with varying lengths of fasteners. SPF is a good specification and installation choice where:
Additional insulation is desired.
The roof substrate has many penetrations.
The roof deck is an unusual shape or configuration.
Lightweight materials are required.
Slope must be added to provide positive drainage.
Is SPF Roofing System Sustainable?
Oak Ridge National Laboratories described sustainable or green roofing systems as "roofing systems that have a long life, low maintenance, save energy, add durability to buildings, control moisture in buildings, and contribute very little to the waste stream. SPF roofing system complies with every criteria of this definition. SPF roofing system greatly reduce tear-offs in many re-roofing projects, which also decreases the amount of materials entering the waste stream. In addition, the SPF systems used today do not contain any ozone -depleting chemicals, and the energy saving characteristics can save considerable amounts of fossil fuel and co2 production, which affects global warming. SPF roofing system arrive on the job site in 55- gallon drums, the foam plastic expands 30 times its original volume on site. This saves greatly on fuel used for transportation.
The need for multiple roofs makes roofing one of the largest contributors of solid waste. According to the NRCA more than 68.5 percent of the $ 11.3 billion low-slope roofing market includes tear-off and replacement of existing roof membrane.
SPF roofing benefits:
Over 30 years of performance history
Conforms to unusual substrates
High thermal resistance per unit thickness
Seamless or monolithic construction
2.5 - 3.0 density
Ultra lightweight ( less than 1psf for a 3-in thick foam plus coating)
Class A fire rating
Miami Dade Approved
No lateral water migration because of the close cell structure
Avoid costly tear-off
Eliminates thermal bridging
Eliminates ponding water thus extending the life span of the roof system.
When choosing a roofing contractor call Tip Top Roofing Inc. at 951-485-4080 or fill out our online request form. We are roofers who know how to get the job done right the first time!
Business Keywords and Service Areas:
Specializing in Roof Restoration, Foam Roofing and Roof Coatings
throughout California and Nevada. Inland Empire Roofing contractor. Moreno Valley's premier roofing company. Riverside county roofing company.